• Color temperature adjustable controller with 433MHz radio frequency (RF) wireless remote
• Control, adjust and dim CCT LEDs to the desired color temperature and brightness
• 12V-24V DC input, 2 channels, 12A max per channel (12A max total)
• Energy efficient; long distance signal transmission of up to 30m
• For use with color temperature adjustable LED strips

Description

This easy-to-use RF controller allows the user to tune the color temperature and adjust the brightness of color temperature adjustable (tunable white) LED strips.  12V or 24V DC power may be connected to the controller via wires or 5mm DC jack.

Programming Controller

Right out of the box, the remote and controller should be paired already. If re-programming is necessary, follow directions below.

To pair:

• Cut off power to controller and wait at least 10 seconds.
• Supply power to controller and, within 3 seconds, press and release the “ON” button on remote once.
• If successful, light would blink 3 times slowly.  Repeat above two steps if unsuccessful.

To unpair:

• Cut off power to controller and wait at least 10 seconds.
• Supply power to controller and, within 3 seconds, press and release the “ON” button on remote 5 times.
• If successful, light would blink 6 times quickly.  Repeat above two steps if unsuccessful.

Note:

• A single remote may control multiple receivers.
• Each receiver may be controlled by up to 4 remotes.

Specifications