• Components compatible with single color, CCT, RGB, and RGBW LED strips and modules
• Supports multi-receiver, multi-remote configurations
• RF technology eliminate the need for direct line of sight between receiver and wall-mount or handheld remote
• Multiple receivers may be programmed to be controlled by a single wall-mount and/or handheld remote
• Multiple receivers may be programmed to operate in sync, without the need to be physically linked together with wires

Description

These components work together seamlessly, providing a flexible and scalable solution for single color, CCT, RGB, and RGBW LED strips and modules.

Components sold separately.

======   Receiver/Controller (#3345)   ======

• Support for single color, dual color (CCT), RGB, and RGBW LED strips/modules
• Support for 12V, 24V, and 36V components
• RF technology eliminate the need for direct line of sight between receiver and wall-mount or handheld remote
• Multiple receivers may be programmed to be operated by a single wall-mount and/or handheld remote
• High capacity 8A per channel

Description (receiver/controller)

This 4-channel RF controller/receiver forms the basis of a flexible system for single color, dual color (CCT), RGB, or RGBW LED strip/modules.  With a capacity of 8A per channel, this controller can drive a significant load.  When a project calls for more LED strips/modules than a single controller/receiver can handle, additional units may be added.  With one controller/receiver set as the master and other units in the same zone set as slaves, all units can be operated together, wirelessly keeping themselves in sync.

A companion remote control (required, sold separately) may be handheld (e.g. 3349) or wall-mounted (e.g. 3347).  Each controller/receiver may be controlled by up to 8 remotes.

Specifications (receiver/controller)

======   Handheld Remote (#3349)   ======

• Control static colors, dimming, and color changing modes
• Touch-sensitive color wheel for adjusting color quickly and accurately
• Support for up to 4 zones separately or synchronously with multiple receivers in each zone
• 3 colors or 3 modes may be saved for each zone
• 10 built-in dynamic modes with pause function

Description (handheld remote)

This RGBW wireless RF remote is a great companion for the 3345RGBW controller/receiver.  Among its many features are a touch-sensitive color wheel for selecting static colors and dedicated key for controlling the white color channel.  It can control up to 4 zones, with the ability to save 3 scenes (colors or modes) for each zone.

A wall-mount holder for wireless remote is included.

Note

• To turn on/off "W" channel, press the "W" key in the center of the color wheel.
• To adjust brightness of the "W" channel, press and hold the "W" key in the center of the color wheel.
• To turn off RGB, press the "W+" key twice in quick succession.  Touch color wheel to turn on RGB.

Programming Controller/Receiver (sold separately):

To pair/learn:

• Power up the controller/receiver and remote control.
• Press "Learning" button on controller/receiver.
• Press any of the four zone keys on remote.
• Touch color wheel on remote; connected LED light flashes to indicate success.

To unpair/unlearn:

• Press and hold "Learning" button on controller/receiver for more than 5 seconds until connected LED light flashes.

Specifications (handheld remote)

======   Wall-Mount Remote (#3347)   ======

• Control static colors, dimming, and color changing modes
• Touch-sensitive color wheel and keys
• Wall-mount to 1-gang electrical box
• 3 colors or modes may be saved for instant recall
• 10 built-in dynamic modes with pause function

Description (wall-mount remote)

This RGBW wall-mount RF remote is a great companion for the 3345RGBW receiver.  Being wall-mount, it will always be reliably found at the same, familiar location.  It features a touch-sensitive control pad for a clean, modern look.  Among its many features are a touch-sensitive color wheel for selecting static colors; dedicated keys for controlling Red, Green, and Blue independently; and a dedicated key for controlling the white color channel. 3 scenes (favorite colors or modes) may be saved for instant recall.

Note

• To turn on/off "W" channel, press the small circle key in the lower right corner of the color wheel.
• To adjust brightness of the "W" channel, press and hold the small circle key in the lower right corner of the color wheel.
• To turn off RGB, press the respective small color circles around the color wheel; touch respective small color circles or color wheel to turn on RGB.

Programming Controller/Receiver (sold separately):

To pair/learn:

• Power up the controller/receiver and remote control.
• Press "Learning" button on controller/receiver.
• Touch color wheel on remote; connected LED light flashes to indicate success.

To unpair/unlearn:

• Press and hold "Learning" button on controller/receiver for more than 5 seconds until connected LED light flashes.

Specifications (wall-mount remote)