• 30º narrowed light beam concentrates light to illuminate desired surface features/textures
• Lens covers and TPU housing enables increased durability with trampling resistance of up to IK08
• Dimmable with optional compatible dimmable transformer and wall dimmer switch or PWM dimmers
• Water-resistant, flexible, continuous length of 16.4 feet (5m), perfect for flat or curved surfaces in dry or damp locations
• Cuttable every 3 LEDs, approx. every 4.9” (along dark cut marks on back of LED strip) to fit various length requirements

Description

This LED strip is specifically designed to light up surfaces to accentuate their features/textures.  Its TPU protective housing enables it to be used both indoors and outdoors.

Note

• Minimum bending radius: 5cm (2").
• Parallel wiring recommended for multi-strip setups.
• Must be used with 24VDC power source of adequate capacity.
• Unroll LED strip completely before powering for long periods of time.
• Unused wires of the LED strip must be isolated (and sealed if used in damp locations).
• Test all components before cutting or permanently mounting the strip.
• Any cuts made to the LED strip should be sealed with silicone caulk or similar product.

Specifications