• High-output, high-CRI, UL-listed LED strip with 1200xSMD2835 LEDs
• Constant current regulating circuitry for superior performance
• Cuttable every 6 LEDs, approx. every 2", at designated cut marks; cut sections may be linked by directly soldering wires
• Dimmable with optional compatible dimmable transformer and wall dimmer switch or PWM dimmers
• Adhesive back for easy installation on dry, flat, smooth, non-porous surfaces

Description

This high quality 24-volt, flexible single color LED strip is perfect for nearly any applications including mood and accent lighting. It features 1200xSMD2835 LEDs.  The entire roll is 32.8ft (10m) in length, and is cuttable and re-linkable. This strip produces very bright light while being very energy efficient.

Designed for the average homeowner as well as lighting professionals, this light can be used for architectural lighting, sign letter lighting, concealed lighting, perimeter lighting among many other applications. This LED ribbon is a cool and efficient way to decorate tables, shelves, entertainment rooms, kitchens, bedrooms, closets, etc. They can also function as eye-catching special effects at stores and expo booths.

1-strip (32.8-ft) and 2-strip (65-ft) kits are available, including a power supply/transformer and a choice of dimming on the AC side or DC side via a wall dimmer switch/remote (wall-plate not included).

Click on the following links for details on specific optional components, depending on configuration:

• 150W / 300W dimmable transformer, magnetic low voltage dimmer switch
• 150W / 240W power supply, RF receiver and surface-mount remote, amplifier

Note

• Must be used with compatible power supply and optional dimmer or controller.
• Avoid exposure to direct sunlight.
• Minimum bending radius: 5 cm (2").
• Unused wires of LED strip must be isolated to prevent potential short circuit.
• Unroll LED strip completely before powering on.
• When the full length is used, it is recommended to power the strip from both ends.
• Test all components before cutting or permanently mounting the strip.
• Do not lengthen LED strip by directly connecting additional strips to it; additional lengths should be wired in parallel (dimmer, if used, and power supply must be of adequate capacity).
• For 2-strip kits the LED strips should be wired in parallel (e.g. to dimmable transformer or amplifier), instead of daisy-chained in series.
• For best results, power LED strip from both ends whenever possible.
• Due to its high power, it is strongly recommended to mount LED strip on aluminum channels to facilitate proper heat dissipation.

Specifications