• Advanced COB design coupled with ultra-high LED density (480 LEDs/meter) for uniform glow without distinct hot spots
• 180-degree wide beam angle and high-CRI (90) reveal colors of objects more naturally and evenly
• Super slim 3mm width fits in tiny spaces
• Cuttable at designated cut marks to suit various length requirements
• Dimmable with optional compatible dimmable transformer and wall dimmer switch or PWM dimmers

Description

This high quality 24-volt, flexible single color LED strip is perfect for nearly any applications including mood and accent lighting. It features COB design with an ultra-high LED density, especially suited for applications that call for uniform glow throughout the length of the LED strip, without any distinct hot spots. Its narrow 3mm width makes it possible to fit in tiny spaces.

Each length is 1m (3.28-ft) long, for a total of 5m (16.4-ft), and is cuttable. This strip produces bright light while being very energy efficient.

Note

• These delicate LED strips must be handled with extra care.
• Must be used with compatible power supply and optional dimmer or controller.
• Avoid exposure to direct sunlight.
• Minimum bending radius is 5 cm (2").
• Unused wires of LED strip must be isolated to prevent potential short circuit.
• Unroll LED strip completely before powering on.
• When possible, it is recommended to power the strip from both ends for best results.
• Test all components before cutting or permanently mounting the strip.
• Do not lengthen LED strip by directly connecting additional strips to it; additional lengths should be wired in parallel (dimmer, if used, and power supply must be of adequate capacity).
• Specs based on factory testing of 1m lengths; voltage drop is greater on 12V strips than their respective 24V versions.
• Due to its high power, it is strongly recommended to mount LED strip on aluminum channels to facilitate proper heat dissipation.

Specifications (LED strip)